Nor-cal Intellisys Isolation Pendulum Valve Manuel d'utilisateur télécharger pdf

Intellisys Isolation Pendulum Valve (IPV)

Quick-Start Guide

200mm, 250mm and 350mm Isolation Pendulum Gate Valves (IPV)

Nor-Cal Products, Inc. 1967 South Oregon St., Yreka, CA 96097 USA

LIT-IPV-QSG, 05/2006

Unpacking & Handling

Use care when unpacking an Intellisys Pendulum Valve. Never lift by the Actuator or Motor, or set on edge.

Lift only on the body surfaces or lifting lugs. Aluminum surfaces scratch easily. A static-safe, particle-free

work surface is recommended. There is no need to remove parts during installation or inspection.

Removing or disassembling parts without authorization from a Nor-Cal rep will void the warranty.

Check The Package Contents:

• Intellisys Isolation Pendulum Valve (IPV)

• This Quick-Start Guide

Serial Label

A Serial Label on the bag shows the model number and serial number of your product. Additionally, Model,

Serial and Date Codes are engraved, and an inspection sticker is affixed to the side of the valve.

Warranty

Nor-Cal Intellisys Controllers and valves are warranted against defects and material workmanship for a period of

15 months after the date of shipment to the buyer. For complete warranty and Intellectual Property details,

please refer to the full manual.

Pre-Installation Functionality Check

Refer to the photograph below for locations of the items that follow.

WARNING: The valve plate movement presents a severe pinching/crushing

hazard. Please keep fingers, hands and other objects away from the valve

opening and associated moving parts.

Connect the Pneumatic Line

For pneumatically driven IPV valves, connect an unpressurized CDA or N

line to the input solenoid then slowly

bring up the pressure to 80PSI.

Open and Close Testing

To open the valve, manually depress and hold the small orange button on the solenoid near the CDA input.

Release the button to close the valve.

Connections & Interfaces

The IPV Pneumatic Air connector and

Manual Open/Close button are located

on the IPV Air Control Bracket, shown here:

Serial Label

Body Engraving

Inspection Sticker

¼” 80 PSI CDA

or N

input

(NOTE: 80-100 PSI is required

for proper valve sealing)

Manual

“Open” Button

Location of Air Control Bracket

1 2

Quick-Start Guide 1

Résumé du contenu

Page 1 - Quick-Start Guide

Intellisys Isolation Pendulum Valve (IPV) Quick-Start Guide 200mm, 250mm and 350mm Isolation Pendulum Gate Valves (IPV) Nor-Cal Products, Inc. 1967

Page 2

Intellisys Isolation Pendulum Valve (IPV) Quick-Start Guide 200mm, 250mm and 350mm Isolation Pendulum Gate Valves (IPV) Nor-Cal Products, Inc. 1967

Commentaires sur ces manuels

Pas de commentaire

Nor-cal Intellisys Isolation Pendulum Valve Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau Nor-cal Intellisys Isolation Pendulum Valve. Nor-Cal Intellisys Isolation Pendulum Valve User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour l'eau Nor-cal Intellisys Isolation Pendulum Valve